FAQs for QSFP28Download PDF Version
What does QSFP28 stand for?
QSFP28 stands for Quad Small Form-Factor Pluggable 28. It is the third generation of the QSFP interconnect systems designed for 25/100G performance per the IEEE 802.3bj specification (100GBASE-CR4).
What's your standard turnaround time for delivery for Siemon QSFP28 Cable Assemblies?
Standard lengths (0.5M, 1M, 1.5M, 2M, 2.5M, 3M, 4M and 5M) with black jackets are in stock. Other lengths and colors are available but require longer lead-times. Contact Siemon customer service for availability
What gauges and lengths does Siemon offer?
30 AWG and 26 AWG cables are available. Standard lengths are 0.5m, 1m, 1.5m, 2m, 2.5m, 3m and 5m. Custom lengths are available upon request. Contact Siemon Interconnect Solutions for more information about ordering.
Do you offer custom EEPROM programming?
Yes, upon request. Cables with custom EEPROMs will be supplied under a different part number.
What product documentation do you offer?
Product specification sheets, customer use drawings, signal integrity reports and EEPROM content tables are available on our website.
Do these products support the 25G per lane data rate and for what standards?
Yes, per SFF-8636, SFF-8661, SFF-8665, SFF-8679 and IEEE 802.3bj, these cables support 25/100G Ethernet.
Do you have design qualification test data?
Yes, mechanical and electrical test data is available upon request.
Do you offer production test data?
We can provide production test data for insertion loss and return loss, NEXT and FEXT upon request. Standard production testing includes insertion loss and return loss. All test data is stored by cable serial number.
What are the other key product attributes?
Due to our automated termination process, our cable assemblies exhibit best in class impedance and cross talk performance
What cable jacket color is available?
Our standard jacket color is black. Red, white and blue are also available. Contact Siemon customer service for availability
Where do you manufacture these cables?
China. We inventory cables in several of our global manufacturing locations for regional supply. Contact Siemon customer service for additional information.
Where are these cable assemblies used?
These are "point-to-point" cables that are used to directly connect two pieces of active network equipment like switch-to-switch or switch-to-server applications They are most commonly used in data centers for ToR (top of rack) or MoR (middle of rack) switch applications.
What is IEEE 802.3bj and 802.3by and how do they differ?
These are Ethernet standards that govern 25 and 100G data transmissions. The IEEE 802.3bj specification was released in 2014 and it addresses 100Gb/s Ethernet data rates using 4 by 25Gb/s channels. It covers the QSFP28 form factor which looks the same as the 40Gb/s QSFP+. The IEEE 802.3by specification was released in June 2016 and it addresses 25Gb/s Ethernet data rates. It covers the SFP28 form factor which looks the same as the 10Gb/s SFP+. But it also includes the QSFP28 form factor and the QSFP28 to four SFP28 breakout cables.
One major difference between the cables used for the "bj" spec and the "by" spec is that the "bj" only recognizes one FEC (forward error correction) mode of operation whereas the "by" specification recognizes three different FEC modes. These are designated as long, short and no FEC. Typically long would be required for cables longer than 3 meters, short for cables 3 meters long and no FEC for cables shorter than 3 meters. However, the designation depends on the performance of the cable and can vary depending on the cable design.